dec0_1's translated output tail ran on wave 0 while the block's other three
waves had finished. It is a prologue (y = r + MLP * s2 and the shuffles that
give each lane its two pixels) followed by the same per-pixel code twice.
gen_rr2_enc0.py --tail-waves N gives each of N waves its own copy of the
tail with only its N-th of the stores (in order: the first pixel's six, then
the second's), and the compiler drops what a copy's stores do not need.
Every stored value comes from the same instructions on the same values as on
one wave. With one window per workgroup, the window index no longer adds
gl_SubgroupID (it was 0 for the only valid wave).
compile_rr2.py uses two waves (D4R_RR2_TAIL_WAVES=1 for one): 120 -> 96
vector registers, 12 -> 16 waves per SIMD; RX 9070 XT, 720p -> 1440p:
dec0_1 565 -> 474 us. Four waves, splitting each pixel's stores, is slower
(529 us). Every image byte-identical on the replay inputs (also robustness2,
no robust access and the split gather build).
Signed-off-by: itchyfeetleech <[email protected]>
- ptx2rr.py fetch0 (the translation's bounds-checked texel fetch): one
unsigned comparison per axis instead of two signed ones; a negative
coordinate is above every size. enc0's gather fetches 102 times: 231
instructions fewer, scalar spills 200 -> 176.
- The output passes (post, down, downp, pooled) also go through
spv_exact_convert.py now and take ptx2rr.py --exact-convert's single f32
guard on binary16 conversions, as the hybrid stages do. Their ISA already
uses v_fma_mix*_f16 for plain conversions, so the check is the whole
instruction mix: only v_and_or_b32 / v_or / v_perm / shifts go (post -16
VALU, down -9, downp -73); every v_fma_f32 / v_mul_f32 / v_add_f32 /
conversion / v_exp / v_log count is unchanged.
Every image byte-identical on the replay inputs (also robustness2 and the
split gather build). RX 9070 XT, 720p -> 1440p: enc0 745 -> 738 us, output
673 -> 665 us.
Signed-off-by: itchyfeetleech <[email protected]>
RADV lowers saturatedConvertEXT to FP8 as a NaN-preserving clamp per element
(v_minimummaximum_f32) followed by v_cvt_pk_fp8_f32, because the hardware's
FP16_OVFL saturation turns infinities into NaN instead of +-448. Run over all
2^32 f32 inputs on an RX 9070 XT, FP16_OVFL gives the clamp's result for
every finite value and NaN; only +-Inf differ.
The f32 values the native stages convert are never infinite (sums of FP8
products and binary16 biases, far below 3.4e38). Writing the conversion as
"an infinity becomes NaN, then saturate" (FINITE in rr_exact.glsl) makes it
the pattern nir_opt_algebraic turns into f2e4m3fn_satfn (vkd3d-proton's,
Mesa >= 25.2, the same release that added the FP8 conversions): the
hardware conversion with FP16_OVFL and no clamp. RR_SAT_CLAMP=1 builds the
old form.
168 - 232 fewer instructions per network stage (enc0 960 -> 128 clamps).
Every image byte-identical on the replay inputs (also robustness2). RX 9070
XT, 720p -> 1440p: frame 3.92 -> 3.79 ms, every network stage faster
(dec0_1 607 -> 576 us, enc0 752 -> 727, enc1 262 -> 247).
Signed-off-by: itchyfeetleech <[email protected]>
ptx2rr.py guards every cvt.rn.f16.f32 with two opaque zeros: on the f32 bits
(against the fused multiply-convert, v_fma_mix*_f16) and on the binary16
bits (against RADV folding float(float16_t(x))). The hybrid stages' modules
(enc0, dec0_1) also go through spv_exact_convert.py, whose NoContraction on
every conversion already prevents the fold, so with --exact-convert only the
f32 OR is emitted.
Checked in RADV's ISA: the same v_cvt_f16_f32 / v_cvt_f32_f16 counts as
before and no v_fma_mix*_f16 (dropping the f32 OR as well brings
v_fma_mixlo_f16 back, so that one stays). Every image byte-identical on the
replay inputs, the split gather build (D4R_RR2_SPLIT=1) as well. 224 / 153
fewer instructions; RX 9070 XT, 720p -> 1440p: enc0 747 -> 729 us, dec0_1
598 -> 592 us.
Signed-off-by: itchyfeetleech <[email protected]>
ACO sizes a shader's registers to the waves its shared memory leaves room
for, so stages that declare less shared memory also get fewer registers and
more waves. Three stages hold buffers whose lifetimes do not overlap:
- Encoder 0 at D4R_RR_RELAXED=3: with the one-wave block the gather no
longer needs a pass of its own. The generated shader runs gather, block
and tail in one 32-thread group and hands the features over in shared
memory that the block's XT and KVS reuse (rr2_w.comp RR2_XF_SHARED). No
gather pass, no record in the arena (36 MB of it lay past the arena at
720p). D4R_RR2_SPLIT=1 keeps the pass.
- enc1: the merge input (GT) is in registers before XT or KVS is written:
17 -> 9 KiB, 240 -> 144 vector registers, 6 -> 10 waves per SIMD.
- dec0_1: r and the MLP sum for the tail are written after the block is done
with XT and KVS, as binary16 pairs: 14 -> 8 KiB, 192 -> 120 registers,
8 -> 12 waves per SIMD.
Also D4R_ENGINE_RR_STAGE_STAMPS=1: a timestamp after every network stage and
output group, printed per stage by d4r-rr.
Every image of six temporal frames byte-identical to the previous model
(1280x720 -> 1440p, 1114x626 -> 1080p, 853x480 -> 1440p, robustness2). RX
9070 XT, RADV, 720p -> 1440p: frame 4.09 -> 4.00 ms (enc0 798 -> 772 us,
enc1 286 -> 266, dec0_1 660 -> 623). Other stages' SPIR-V is unchanged.
Signed-off-by: itchyfeetleech <[email protected]>
Models built from nvngx_dlssd.dll 310.9.1 are byte-identical to the capture-built ones (every file, plus
d4r-rr's outputs on capF, capF4K, capF900, capFXparticles and capDT). 310.9.1 contains 310.7's D/E kernels
and weights.
- the weights go into the command buffer with vkCmdUpdateBuffer (recordContents); the host-visible staging
copies are gone, and the host copies are dropped once recorded
- an engine's own output image is created only for frames that do not write the caller's texture
(K, M, RR D/E, RR F), cleared on first use
- preset F: the tile slots share the arena with the network's regions, and the gather records' rows fill the
gaps between encoder 0's regions (rr.txt "s3", six words on enc0's block; D4R_ENGINE_RR_ARENA keeps the
old separate layout for arena dumps)
- the shim reserves the render size the feature was created with for the M/L Vulkan network instead of the
output size; a frame beyond it goes to a second, output-sized engine (1.1 GB less for M, 1.4 for L at
1280x720 -> 4K); replay_m gains D4R_M_CAPACITY
Every reference capture still byte-identical; through the shim the harness process peaks 159 MiB lower.
- layer_m.comp builds relaxed by default (M_RELAXED: f32 accumulators, paired FP8
conversions, no activation table) with two windows per wave sharing weight tiles
(WPW=2); M_EXACT=1 keeps NVIDIA's roundings, bit-identical to the CUDA path
- layer.comp reuses weight tiles across its waves (TPW=2 in the 32-channel layers)
- engine/rr/rr2_w.comp: one wave per window for preset F's dec0_0 and enc0, used by
compile_rr2.py at the new default D4R_RR_RELAXED=3 (build_native_model.sh too);
D4R_RR_FUSE=1 matches the reference's fused multiply-adds, ptx2rr.py --snorm16
- [Engine] Network defaults to vulkan; the HIP network is opt-in
- engine/compile_rr2.py, runtime_rr2.inc, engine/rr/rr2_m.comp, exposure_f.comp,
gen_rr2_enc0.py, rr2_pack.py, rr2_ref.py: the rr2_* model (nvngx_dlssd.dll 310.9's
third network) as d4r's own shaders - exposure, enc0 gather/block split, enc1-5 and
dec4-0 through one matrix shader, translated output passes; weights packed from the
DLL, argument blocks from the capture
- ptx2rr: match the driver's fused roundings - opaque-zero OR around cvt.rn.f16.f32
against v_fma_mix, half-away-from-zero formatted stores, UNORM 10:10:10:2 as RGBA32F
of q/1023, OCML tanhF with the AMDGPU exp lowering, binary16 fma and fetch roundings;
--probe for register bisection against ZLUDA
- dec0_m/swin_m/enc0_*: RR_MIX build option (D4R_RR_MIX=1), one v_fma_mix rounding per
32-deep step, ~5% faster, not bit-exact; default build stays exact
- runtime_rr.inc: RModel/REngine dispatch to the D4RR0002 model; replay_rr: RGBA32F and
A2B10G10R1010 texel sizes, roughnessPacked bit, larger debug staging
- shim: engine\rr-f model slot, 310.9 version probe so preset F is only claimed when the
CUDA path has it; d4r.ini / d4r_config.py Model = F; run_rr_engine_compare.sh D4R_RR_DLL
- kernels/rr/swin_native.h + rr_swin_native_test.cpp: HIP port of encoder 1 for the
FP8-product and rounding cost measurements
- engine/rr/README: preset F's block, options, capture-by-capture results, timings and
the open camera-matrix difference
- GameFrameR/RFrameImages: DLSSD.ScreenSpaceSubsurfaceScatteringGuide (arg 264)
and DLSSD.ColorBeforeParticles (output stage, texture 416 with its own history
pair 384/392, zero-initialised on first use); guides array 6 -> 8
- DLSS.Use.HW.Depth: byte 980 and output byte 443 bit 24 (Cyberpunk passes the
nonlinear depth buffer); replay's 'inverted' field becomes a bitmask
- shim: bind the two new resources, read the HW-depth flag, and accept every
preset hint except E's 5 by mapping it to D's diamond_wallaby kernels
(harness captures show 0x80000002/0x80000005 run preset D)
- harness: D4R_HARNESS_RR_EXTRA=particles,sss and D4R_HARNESS_RR_HW_DEPTH=1
- ptx2rr: out-of-range integer fetches return zero, matching ZLUDA's behaviour
(the reference the stages are checked against)
- engine/rr/README: the capture findings behind the offsets
- engine/rr: d4r's own shaders for the denoiser frame (exposure, six encoders,
five decoders, hkpn output stage) at NGX layouts, plus PTX->GLSL/HIP packing
scripts, reference implementations and weight extraction
- runtime.h/runtime_rr.inc, game_rr.{h,cpp}: GameDenoiser wired into the engine
build (d4r-rr replay binary) and the D3D12 shim's feature-13 path
- shim: answer GetFeatureRequirements from d4r's own state only (the old
cross-binary CUDA handoff crashed OptiScaler's scan); drop the core's
CUDA GetFeatureRequirements import
- shim/harness: exact guide capture/replay of a frame's RR inputs
- kernels/rr: expanded enc0/engine prototypes; kernels/tools: ptxsim rewrite
plus rrsim and an engine test; vulkan: ptx2glsl FP8/cooperative-matrix
support, kvk inout buffers and KVK_DISABLE_OPTIMIZATION
- bridge: report the surface array in cuSurfObjectCreate traces
- packaging: RR settings and the ICU launch overrides in D4R_README
itchyfeetleech